Intelligent Energy Optimizers

"Our systems have saved businesses millions. "

PRODUCTS & SERVICES

IEO is commited to providing the strongest and most innovative solutions in the industry. The scope of each project allows us to determine the needs and requirements of each job. Our project is more than a job it is a mission and with our experience, partners and research teams we are able to provide our clients with options that typically exceed their energy conservation needs. On this page are a few of our main products which can be used in a typical energy optimization project.

The SKALAR is a computer and electronic system, installed in to a small box, the size of a shoebox, fitted at every location, with 6 inlets for analog and digitally measured information. It can measure: electricity, water, and natural gas or any other measurable object. As the SKALAR is a computer (Java data base) it does all the calculations that are predicted by the Management and are programmed in to it, Before transmitting the data by a secured method of communications to the central office ( into the EnerGo) through one of it's 2 outlets available ( the other outlet can transmit to any other location).

The transmitted data from all of the locations through the SKALAR is then collected on real time, into an analyzing and bench marking computer program called "Energo" which is installed at the head office, and together they compose the system. The system allows "seeing on real time" each measurable activity in all of the locations and is capable to do the benchmarking between the measured items, finding out where the use is excessive and then the team will identify what causes the excessive use. Once identified, corrective measures can be undertaken and reduction in consumption will be achieved.

Click here to dowload the technical PDF

Click here to download the PowerPoint Presentation

Intelligent Peak Load Control The Emacx Demand Control is the art of Intelligent Peak Load Control (IPLC) to avoid demand peaks and their associated expense in a facility without jeopardizing operations. The basic approach of the demand management system involves leveling of the integrated kW fluctuations inherent in the operation in any group of equipment. The demand controller is capable of distinguishing between unnecessary demand peaks and actual needed energy consumption. Dynamic calculations with specially developed algorithms allow a non- jeopardizing operation at all times. The dynamic calculation always compares the instantaneous power consumption with the residual power output value (see graph below). The residual output value is a theoretical value indicating the maximum added kW consumption possible to maintain the 15 or 30 minute kW average at the end of each utility interval. With that algorithm, the system is capable at any given time to distinguish between necessary and unnecessary demand peaks and therefore initiate curtailment action if necessary or none particularly at the end of 15 / 30 period. This further prevents unnecessary switching or load cycling that can cause equipment damage.

Click here to download the technical PDF

The LEC (Lighting Energy Control) is a unique patented system that operates on a micro multi stage voltage transformation system (A ratio of 0.081 for every stage) that was purposely developed by Power Electronic Systems – Israel, for this application.
It reduces the voltage by approximately 5V every stage, adjustable up to 60V.
Controlled by an electronic system operating microprocessors, astronomic clock and 4 adjustable time zones.
Active voltage balancer + - 1%.
Insignificant self-consumption.
Insignificant loss of illumination (between 8 and 15%), when kWh reduction is 20 to 30%, (subject to the condition of the wiring, ballasts and bulbs).
Create smooth lighting operations with no harmonics disturbances.

Click here to download the technical PDF

Click here to download the PowerPoint Presentation